SLCBL Downspout Hanger Kit (SLCBL-RDOWN1)

BriskHeat Downspout Gutter Hangers are used to safely position heating cable into downspouts as part of a roof & gutter snow melting and de-icing system. Combined with SpeedTrace Self-Regulating Heating Cable, BriskHeat de icing cables for gutters, this kit completes your gutter heat tape de-icing solution.

• Provides mechanical protection to prevent damage to the heating cable as it may go over sharp edges in roof & gutters.
• For use with SLCBL and SpeedTrace self-regulating heating cable for roof & gutter snow melting and de-icing.
• Must be bent at 90° and secured with UV resistant cable ties before installation.

Installing Heating Cable Downspout Hanger Bracket in Gutter

Step 1: Bend the Downspout Hanger Bracket to approximately 90 degree. Insert cable ties through holes on the Hanger Bracket and attach the gutter heat cable.

Step 2: Position the Hanger Bracket and tighten the cable ties. Trim off excess cable tie.

Step 3: The Hanger Bracket should be centered on the edge of the downspout to prevent mechanical damage and to support the heating cable.